Dixell XWEB 3000 Installation Manual Page 69

  • Download
  • Add to my manuals
  • Print
  • Page
    / 100
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 68
1592010880 XWEB3000_5000 EVO OPR GB r1.0 2014.11.28 69/100
VISUAL FEEDBACK
Once the supervision program is running, it provides the user with important information in graphic form. The
following table summarises the possible work situations.
Logic block
value/colour
description
SDC
ENA/green
on
DIS/grey
not active
DLY/grey green
awaiting deadline of activation
delay
DUR/blue
active and awaiting deadline of
duration
STE
ENA/green
on
DIS/grey
not active
ELS
red background
on
green background
not active
ODC
SENT/yellow
command sending
ODS
???
status unknown
Act
active for digital conditions
NotAct
not active for digital conditions
Set
if all sets are the same and the
control occurs on a set-point
NEQ
different set values and the
control occurs on a set-point
3.4.7 BACKUP/RESTORE
This procedure allows the user to save the system data and/or restore it if required. It is
possible to create a backup on the XWEB memory or on the hard disc of the client's PC as
well as on storage devices connected via USB. Attention: the USB devices used for restore-
backup, must only be inserted before starting such procedures and disconnected when these
have been completed. The restore procedure overwrites data memorised on the XWEB. This
means that restoring a backup returns the XWEB status to that present on the date when the
backup was performed. When clicking on the icon, the user must select which type of operation is to be
completed:
The backup and restore procedures can be run on partial xweb data, such as:
EVO system configuration. Basic configuration of XWEB machine
Operating configuration. Configuration of controllers, Alarms, Scheduler, other
Alarm/System logs.
Main historical data.
Backup
The procedure allows for the saving of data selected in "Sections", on the device selected in "Destination".
The most thorough backup is run by selecting all items in "Sections". Press "Start backup" to complete the
operation.
Page view 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 99 100

Comments to this Manuals

No comments