Dixell XWEB 3000 Instruction Manual download pdf (Page 52)

XWEB 500 – rel.1.0

In the upper part you can see information concerning the name of the instrument that the system will use as

base model (“Source device”).

In our example we have a XJP60D whose name is “Acq. module 1”. It is possible to change the name of the

“Target device” by clicking in the field “Name”.

By clicking “Clone” button XWEB 500 begins to broadcast this setup to all the compatible instruments. Once

it has finished a summarising window will appear. It is also possible to decide to clone both the typology and

the recording interval by ticking the corresponding columns.

3.4 STARTING MONITORING DATA

At this point it is possible to start the server. Click on “Modify”. This new window will appear

Check/uncheck the proper action and push “Apply”.

Data reading: XWEB 500 will only read data coming from RS 485.

52/103 10/01/2006 - 1592010900

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 102 103

No comments

Dixell XWEB 3000 Instruction Manual Page 52