Dixell XWEB 3000 Instruction Manual download pdf (Page 92)

XWEB 500 – rel.1.0

APPENDIX A:

DEVICE ADVANCED SECTION

In this section we describe how you can customize your device regardless its factory setup. We will point out

only the main sections, without describing each fields in deep. Please notice that the page is divided in many

rows. Each of them customizes a particular function of the device itself.

To access this section please stop data reading/recording, then go to “Configuration”->“Devices” roll-down

menu. Here with selection “Actions” roll-down menu choose “Advanced”, then with “Devices” choose the

proper controller.

“Analog Input” section shows you all the analog input that a device can use. These values can be displayed

in decimal or integer values, of course you have to choose the same unit of measurement for both the XWEB

and the instrument. The suffix “-I” means you want to display integer, default value is decimal. The same for

Celsius and Fahrenheit degree. The suffix “-F” means Fahrenheit degree.

Warning: the integer/decimal or °C/°F configuration have to be chosen according to the real setting

of the instruments.

“Digital Input” row need particular attention. The values you find here are the factory defaults, so if you have

made modifications to the device setup, you are requested to apply the same modifications in this menu.

This is very important because all the values stored inside XWEB 500 devices section must be the same as

the ones stored inside the EEPROM of the instrument. A common error for example is to modify “Generic

Alarm” to some other values inside the instrument, than leave the value marked inside Advanced section.

XWEB 500 will send you an alarm every time the switch changes status, even if it is not a generic alarm.

“Device Status” section allows you to customize your instruments, of course the same values have to be set

both on XWEB 500 and the instruments themselves.

92/103 10/01/2006 - 1592010900

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 102 103

No comments

Dixell XWEB 3000 Instruction Manual Page 92